A Ray's company - serving Enterprise, NV
Heating & Furnace in Enterprise, NV | Ray’s Heating & Air Enterprise - Ray's Heating & Air Enterprise

Heating & Furnace in Enterprise - Fast Local Response, Upfront Pricing

Same-day heating and cooling service with the price agreed before we start, and no overtime surcharge for evenings or weekends. Licensed, insured, EPA-certified technicians.

We answer around the clock

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Furnace & heatingFurnace & heating
AC repairAC repair
Heat pumpsHeat pumps
Ductless mini splitsDuctless mini splits
CarrierCarrier
TraneTrane
GoodmanGoodman
Every visit starts with

Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed

We have financing partners for your new heating and cooling system*On approved credit; ask us about your options

Diagnosis first, numbers second - you approve the repair price before a single part goes in.

Get your free estimate

Trusted Heating & Furnace for Enterprise Homeowners

Most furnace failures in Enterprise don’t announce themselves politely. One cold January morning the blower runs but the air comes out cool, or the burner fires for 90 seconds and shuts down, and you’re standing in the hallway trying to remember what the last guy actually fixed. We’ve been doing this work in the Las Vegas Valley for over 29 years, owner-operated since 2002, and our technicians have up to 24 years of experience with your make and model. Ray answers the phone himself. We test before we quote, and we don’t leave until the heat is coming out the way it should.

Call (844) 455-2034

Call (844) 455-2034 for a free estimate, and same-day service in Enterprise whenever the schedule allows.

What Our Heating & Furnace Service Includes

Furnace Repair

Furnace repair is the work of finding out why your system stopped making heat and fixing that specific thing. It could be a limit switch tripping on a 40-degree night, a flame sensor coated in dust, or a blower motor pulling too many amps. We put gauges and a meter on the unit before we say anything. If you’re in Enterprise and your furnace is short-cycling, blowing cold, or making a noise it didn’t make last winter, we can usually get eyes on it the same week.

We work on gas furnaces across all the major brands, and every repair carries the 90-Day Done Right Promise. If what we fixed turns out to be wrong, one call brings Ray back.

Furnace Repair

Furnace Replacement

A furnace replacement is a big purchase, and the honest answer to “repair or replace” depends on the age of the unit, how often you’ve called us out this season, and the condition of the heat exchanger. We do a load calculation first so the new unit is sized for your house, not for whatever the old one happened to be. Then we give you a written fixed price and a set install date. No surprise line items the morning of.

We handle the paperwork for any rebate or financing you qualify for, so you’re not chasing it down on your own. Expect a two- to four-day turnaround from approval to install.

Furnace Replacement

Furnace Tune-Up

A tune-up is a flat-price visit where we clean, test, and tell you in writing what we actually found. We check gas pressure, flame color, amp draw on the blower, and the condition of the heat exchanger. We also test the capacitor while we’re in there, because a weak capacitor in the summer is often a failed compressor the next year.

The technician is not paid on what they sell. That’s a business decision, not a slogan. You get the readings and the recommendations, and you decide.

Furnace Tune-Up

Heat Exchanger

The heat exchanger is the metal part that keeps combustion gases separate from the air you breathe. A crack in it is not a maintenance note, it’s a safety issue, and it’s one we take seriously. A cracked heat exchanger can let carbon monoxide into your home. We inspect it with a camera and a visual pass, and if it’s compromised, we tell you straight and give you the repair or replacement numbers.

Never let anyone hand-wave this part of the inspection. If a technician tells you the exchanger is fine, ask them what they saw.

Ignitor Replacement

The ignitor is the hot-surface element that lights the gas when the thermostat calls for heat. When it fails, the burner never lights and the furnace goes through a safety shutdown cycle. We test the ignitor’s resistance and confirm the control board is actually sending voltage before we replace anything. A furnace that clicks repeatedly without firing is a classic sign.

This is typically a short repair, often finished in one visit, and it’s one of the more straightforward fixes on a gas furnace.

Gas Valve Repair

The gas valve controls gas flow into the burner assembly. When it sticks open, sticks closed, or fails to open on a call for heat, the furnace either won’t fire or won’t shut off safely. This is a safety-critical component, and we treat it that way. We test inlet pressure, manifold pressure, and the valve’s response before recommending any replacement.

If the valve is sticking, we don’t try to clean it and hope. We give you a clear price for a proper replacement. Any work on gas lines is done by someone trained for it, and we’d tell any homeowner the same: don’t touch the gas side yourself.

Need help today?Fast, friendly service and a no-obligation free estimate.

Call (844) 455-2034

Explore

Styles & brands we work with

  • AC repair
  • Furnace & heating
  • Heat pumps
  • Ductless mini splits
  • Carrier
  • Trane
  • Goodman

Brands We Service for Heating & Furnace

We service Carrier equipment regularly and know the wear patterns that show up on their older condensing furnaces, particularly around the inducer and the pressure switch tubing. Lennox units we see in a lot of Enterprise homes, and we know the control board quirks on the mid-2000s models well enough to save you a wild-goose-chase diagnostic visit. Trane and American Standard furnaces hold up well, but when their ignitors or flame sensors start to drift, the furnace will let you know with a lockout on cold mornings.

Whether you’ve got Carrier, Trane, Lennox, American Standard, or any other make, we can help. We work on Goodman, Rheem, York, Daikin, and Bryant the same way. No brand gets a shortcut diagnosis.

Signs You Need Heating & Furnace Right Now

  • No heat at all. The thermostat is on and set above room temperature, but the blower runs and the air stays cool. This usually means the ignitor, the flame sensor, or the gas valve has failed, and every hour you wait is an hour the house gets colder.
  • The burner fires and shuts down. A furnace that runs for 30 seconds to a few minutes and then quits is short-cycling. It could be a blocked flue, a bad limit switch, or a pressure switch issue, and none of those sort themselves out.
  • A yellow or orange flame. The burner flame should be crisp blue. Yellow, orange, or lifting flames are a combustion problem and a possible carbon monoxide signal. Shut the unit off and call us.
  • Rotten-egg smell near the furnace. That’s the added odorant in natural gas. If you smell it, don’t flip switches, get out, and call your gas utility first, then call us to inspect the furnace once it’s safe.
  • Rumbling, banging, or a blower that grinds. These are mechanical sounds, not normal furnace operation. A bearing going bad in the blower motor or debris in the burner can turn a small repair into a big one if you leave it.

If you’re seeing any of these, call (844) 455-2034. We answer around the clock.

Our Heating & Furnace Process – Step by Step

  1. 1
    We listen. When you call, a live person picks up, not a voicemail maze. Ray or the person at your door will ask what the furnace is doing, how old it is, and whether anything changed recently. Those three answers tell us a lot before anyone touches a tool.
  2. 2
    We diagnose before we quote. Readings first, numbers second. We check gas pressure, ignitor resistance, flame sensor microamps, and blower amp draw. If the readings say the blower is fine and the flame sensor is the culprit, that’s what we tell you. We don’t say “compressor” or “control board” until the meters back it up.
  3. 3
    We show you the numbers. Before any work begins, you see the readings and the price. If it’s a repair over $200, the repair is $40 off. Every estimate qualifies for a free second opinion if you want one.
  4. 4
    We fix it, and we back it up. The repair is done by a background-checked technician, and every heating job is stamped with the 90-Day Done Right Promise. If something isn’t right, one call brings us back.
  5. 5
    We follow up. If it’s a replacement, we handle the rebate and financing paperwork and set the install date. If it’s a repair, we make sure the heat is coming out the vents before we drive away.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

How Much Does Heating & Furnace Cost in Enterprise?

Furnace repair in Enterprise typically runs $150 – $700, depending on the part and how deep the diagnostic goes. An ignitor or flame sensor is on the low end; a blower motor or control board is on the high end. A furnace tune-up runs $80 – $200, and it’s the cheapest $80 you’ll spend if it catches a failing component before January.

What moves the number: the age of the unit, whether the part is a stock item or needs to be ordered, and how much diagnostic time it takes to isolate the actual failure. Homes in older Enterprise neighborhoods, especially those with 1990s construction and original ductwork, sometimes turn up a second problem (a cracked heat exchanger or disconnected flex duct) that wasn’t on the original work order. We show you that before we quote it.

How to avoid overpaying: ask what the readings were, ask what part failed and why, and don’t accept “it’s the whole board” without a meter reading to back it up. We give you both on every visit. There’s no trip charge inside Clark County, and the second opinion on any written estimate is free.

Call (844) 455-2034 for an exact quote. Estimates are free.

Heating & Furnace Near Enterprise – Our Service Area

We serve Enterprise and the surrounding valley, including neighbors in Heating & Furnace in Spring Valley and Heating & Furnace in Paradise. Typical response time in Enterprise and Spring Valley is same-day or next-morning; out toward Sandy Valley and Boulder City it’s usually the next available appointment. If you’re searching from your home in any of these areas, we can usually tell you on the phone when the next spot opens.

Serving Enterprise, NV – Our Local Coverage Area

We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked Questions – Heating & Furnace in Enterprise

Schedule Your Heating & Furnace Service in Enterprise Today

If your furnace is short-cycling, blowing cold, or just past due for a tune-up, call (844) 455-2034 and a live person will pick up, day or night. We’ll give you a free estimate, upfront pricing, and same-day service in Enterprise when the schedule allows. Every job carries the written 90-Day Done Right Promise. Check out our Heating & Furnace in Enterprise page for the full scope of work, and we’ll see you at the door.

Written by the team at Ray’s Heating & Air Enterprise.

Why Enterprise Chooses Ray's Heating & Air Enterprise

We set the standard for heating & furnace in Enterprise.

30-60 Min Response

Fast dispatch across Enterprise. Same-day and after-hours emergency service available.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Enterprise

Getting your heating & furnace handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your heating & furnace needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Enterprise - typically within 30-60 minutes.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and 100% satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local heating & furnace pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    A background-checked tech heads outLicensed & insured, typically within the hour.
  4. 4
    You approve before work beginsNothing starts until you say go.

What Enterprise Customers Say

Trusted by homeowners across Enterprise and surrounding areas.

★★★★★

"Two other companies had told me the furnace needed replacing. Ray found a cracked pressure switch hose, replaced it for under two hundred, and told me the unit had a good five years left."

Lamar Whitsett
★★★★★

"Shoe covers on without being asked and a drop sheet under the whole work area. Small thing, but it tells you how somebody works."

Paloma Izaguirre
★★★★★

"Ray has been out to this house four times over six years and it has been Ray every single time. Not a rotating cast of technicians who have never seen the system before."

Dwight Kasprzak

Ready for Heating & Furnace in Enterprise?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Enterprise.

(844) 455-2034

Request a Free Estimate in Enterprise

Tell us about your heating & furnace needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Local Service Coverage
Call Now - 24/7 Dispatch