Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateFast, Reliable Heating & Furnace Across Enterprise
If your furnace won’t light on the first cold night, or a heating tune-up was skipped last fall, we’re the call to make in Enterprise. Our technicians have up to 24 years of experience, and our team answers the phone around the clock, every day, and has handled heating and furnace work across Enterprise for households that don’t want a rotating cast showing up. Enterprise isn’t a generic furnace town. The far south valley builds here were sized for peak-load cooling and live with very hard water, and the heat that tops 110°F in July is baking the attic-mounted blowers in these same master-planned homes. That changes what a heating call looks like. We know the territory, from Southern Highlands up through Mountain’s Edge, and we can get to Enterprise fast. Call (844) 455-2034 and we’ll talk through what’s happening.
Why Ray’s Heating & Air Enterprise Is Enterprise’s Preferred Heating & Furnace Company
Enterprise calls us because we answer, we show up, and we tell you the truth about what the system needs. The name on the company is the name on the phone; Ray publishes his name, address, and license number so anyone can check them, and the same person who walks into your Southern Highlands or Mountain’s Edge home is the one who’ll stand behind the work. Every heating and cooling job carries our 90-Day Done Right Promise in writing: if it’s not done right, one call brings Ray back.
Homeowners in Enterprise have been burned by outfits that quoted one price on the phone and another at the door, so we do it differently. Readings first, numbers second – you see what the meter and the gauges say before anyone says the word “replace.” Technicians are background-checked and uniformed, and they don’t rotate out on you. Our standing offers are simple: a Free Second Opinion on any written estimate, and No Trip Charge inside our own county. We’re locally owned and owner-operated, and the L.O.C.A.L. code – Local roots, On time, Community first, Accountable, Loyal – anchors how we treat Enterprise. Ask anyone on your street, or call (844) 455-2034 for a free estimate.
Styles & brands we work with
- AC repair
- Furnace & heating
- Heat pumps
- Ductless mini splits
- Carrier
- Trane
- Goodman
Our Heating & Furnace Services in Enterprise
Here’s how our Heating & Furnace team handles heating calls in Enterprise, from a quick no-heat fix to a heat exchanger that needs a real judgment call.
Furnace Repair in Enterprise
Most no-heat calls in Enterprise trace to a failed hot-surface ignitor, a flame sensor coated by spring wind-blown dust, or a control board cooked by attic heat, rarely a dead gas valve. We climb into the attic, confirm the ignition sequence and gas valve, check static pressure and blower amp draw, and inspect the heat exchanger before recommending anything. A typical furnace repair in Enterprise runs $150 – $700, and you’ll see the readings and the numbers before any work starts.

Furnace Replacement in Enterprise
In the 2000s-era tract homes from Southern Highlands to Mountain’s Edge, whole subdivisions are hitting replacement age on nearly the same schedule, and a lot of the builder-grade furnaces were oversized from the start. We do a real load calculation, match tonnage to the house, and run the refrigerant and code sizing correctly so the new unit stages properly instead of short-cycling on a mild winter night. You’ll get a written fixed price and a set install date before anything is ordered.

Furnace Tune-Up in Enterprise
A tune-up in Enterprise has to account for attic conditions. We clean the flame sensor and check the ignitor before a cold snap strands you, measure blower amp draw, look at duct insulation cooked by 140°F+ July attic heat, and clear the dust that fouls the return each spring. A typical furnace tune-up in Enterprise runs $80 – $200, and you get a written report of what we actually found.

Heat Exchanger and Safety Checks in Enterprise
A cracked heat exchanger is a safety issue, not a maintenance item, and dry high-desert air and years of thermal cycling in a hot attic can stress the metal. Our team inspects the exchanger for cracks and tests the combustion sequence, then tells you plainly whether it’s a repair or a replacement you can live with. If there’s any doubt, we’d rather show you the readings and let you decide.
Trusted Brands We Service in Enterprise
We work on all the major brands you’ll find in Enterprise’s master-planned homes, including Bryant, Carrier, Trane, and American Standard, whether your system was installed when the subdivision went up or swapped out since. We don’t stock parts in a warehouse or claim to; what we do is diagnose correctly the first time and get the right part quickly so you’re not waiting a week for heat. If your system is a brand we haven’t named, the odds are we still service it – just ask.
See the difference
Before
After
Before
After
Before
AfterCommon Heating & Furnace Problems We See in Enterprise Homes
The furnace failures here follow a pattern you won’t see in cooler-valley or single-story slab homes, because so much of Enterprise’s heating equipment sits in an attic above stucco-over-frame construction. Here’s what we run into most:
- Ignitors and flame sensors fouling from spring dust. In Mountain’s Edge and Southern Highlands, wind-driven dust gets pulled through the return each spring and coats the flame sensor. The result is an intermittent no-heat call on the first genuinely cold night, when the furnace tries to light and shuts back down.
- Blower motors and control boards overheating in the attic. The same 140°F+ July attic heat that cooks duct insulation also bakes the blower motor and control board long before the heat exchanger itself fails. Homeowners are often surprised the “heater” died in August; it’s the attic, not the burner.
- Oversized builder-grade furnaces short-cycling on mild nights. Original load calculations and tonnage pairing were never revisited in much of Enterprise’s 2000s build-out. When the furnace is too big for the house, it runs short cycles on the mild winter nights we get here, and the equipment wears faster.
- Uneven heat across multi-zone estates. Larger Southern Highlands homes with two or three systems often heat one zone poorly because a zoning damper is stuck or a thermostat is out of calibration. That’s a controls problem, not always a furnace problem.
Pricing for Heating & Furnace in Enterprise, NV
We don’t quote heating work over the phone and then surprise you at the door. A technician gets on site, takes readings, and shows you the numbers before any work begins – if you get a written estimate somewhere else, we’ll give you a Free Second Opinion on it. Here are the market ranges for Enterprise this year:
| Service | Typical Enterprise Range |
|---|---|
| Furnace Repair | $150 – $700 |
| Furnace Tune-Up | $80 – $200 |
What moves the number: whether it’s a $150 flame sensor cleaning or a $700 repair involving a blower motor or control board, whether the heat exchanger needs inspection, and how accessible the attic air handler is. Bigger jobs like a full furnace replacement are load-calculated and quoted in writing, with the install date set before we order. Call (844) 455-2034 for a free estimate.
We Also Serve Cities Near Enterprise
Enterprise is one part of the territory we cover in the south valley. We also take heating and furnace calls in Spring Valley, Paradise, Winchester, and Henderson, with the same readings-first approach and the same written promise. If you’re just over the line in one of those towns and your furnace is acting up, call us and we’ll sort out a time.
Serving Enterprise, NV – Our Local Coverage Area
We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Heating & Furnace in Enterprise
Nine times out of ten it’s a failed hot-surface ignitor or a flame sensor coated by spring wind-blown dust pulled through the return, not a dead gas valve. In Enterprise’s dusty spring climate, that coating builds up quietly all summer and only shows itself when the furnace first tries to light in the fall. A tune-up before the cold snap catches it; call (844) 455-2034 and we’ll get it checked.
It’s usually the zoning, not the furnace. A stuck damper or an out-of-calibration thermostat in one zone will starve that area of heat even when the equipment is running fine, and the repair is far cheaper than replacing a furnace that isn’t broken. We check the zoning dampers and thermostats across all zones before recommending anything; call for a free estimate.
Not necessarily. Enterprise’s mild winters mean a heat pump can handle most heating here, but your existing ductwork, insulation, and how the home was sized all factor in, so the answer isn’t the same for every house. We’ll run the load calculation and lay out the numbers both ways so you can compare honestly; call (844) 455-2034 and we’ll walk through it.
Once a year, ideally in early fall before the first cold snap. The attic air handler here fights dust from spring winds and 140°F+ summer heat that stresses the blower and control board, so an annual tune-up catches a fouled flame sensor or worn blower before it strands you. A typical tune-up in Enterprise runs $80 – $200; call to schedule.
Most furnace repairs in Enterprise land between $150 and $700, depending on whether it’s a simple sensor cleaning or a blower motor or control board replacement. You’ll see the readings and the numbers before any work begins, and if you’ve got a written estimate elsewhere we’ll give you a Free Second Opinion on it. Call (844) 455-2034 for an exact quote – estimates are free.
Written by the team at Ray’s Heating & Air Enterprise.